Xray T2

1
2
3

Xray Ball Joint 4.9mm - Short Open (4 buc)

In Stoc

Xray T2

Xray Ball Joint 4.9mm - Short Open (4 buc)

Set of four molded composite open ball joints.

Xray Hard Coated Swiss 7075 T6 Aluminum Drive Shaft (52mm)

In Stoc

Xray T2

Xray Hard Coated Swiss 7075 T6 Aluminum Drive Shaft (52mm)

This is a XRAY Hard Coated, Swiss 7075 T6, 52mm Aluminum Drive Shaft, intended for use with the XRAY T2 platform T2008/ T2009.

Xray High-Performance Kevlar Drive Belt Front 3x507mm - 1 - 721

In Stoc

Xray T2

Xray High-Performance Kevlar Drive Belt Front 3x507mm

This is an optional Kevlar front drive belt for the XRAY T2 1/10th scale touring car. Ultra-Flex High-Performance Drive Belt For top competition racing XRAY offers these specially modified high-performance Kevlar reinforced drive belts.

Curea Xray T3 fata din kevlar 3x513mm - 1 - 720

Xray T2

Curea Xray T3 fata din kevlar 3x513mm

Curea din kevlar, pentru automodelul Xray T3, fata. Cureaua este finisata manual, are rezistenta foarte mare, asigurand un rulaj cu frecari minime.

Xray High-Performance Kevlar Drive Belt Rear 3x186mm

Xray T2

Xray High-Performance Kevlar Drive Belt Rear 3x186mm

This is a XRAY 3x186mm High-Performance Kevlar Rear Drive Belt, and is intended for use with the XRAY T2 008, T2 009 and T2R Pro.

Xray High-Performance Kevlar Drive Belt Rear 3x180mm

In Stoc

Xray T2

Xray High-Performance Kevlar Drive Belt Rear 3x180mm

Specially modified high-performance Kevlar-reinforced 3mm-wide drive belt is 1mm narrower than original 4mm belt (#305441) for increased transmission efficiency.

T2/T3 Steel Steering Bushing (2+2)

Xray T2

Bucsi otel C-hub T1/T2/T3 (2+2)

Bucsi prelucrate foarte precis, pentru jonctiunea fuzeta-C-Hub. Setul include piesele pentru 1 model.

Rear Turnbuckle L&R 25mm - Spring Steel (2 buc)

In Stoc

Xray T2

Rear Turnbuckle L&R 25mm - Spring Steel (2 buc)

Set of two adjustable turnbuckle for adjusting camber of rear uprights, manufactured from world-renowned top-secret "Hudy Spring Steel".

Xray Foam Bumper - Hard

Xray T2

Bumper Xray microporos - Hard

Protectie la lovituri frontale, din microporos dens dar foarte usor.

Xray Diff Washer 17x23x1 (2 buc)

In Stoc

Xray T2

Xray Diff Washer 17x23x1 (2 buc)

Two diff washers for ball-differentials. Each side of the washer has a distinct finish; a polished side against which the diff balls ride, and a rougher machined side that contacts the duraluminum diff output. Specially hardened to assure maximum life.

Bucse pentru rulmentii fuzetelor de aluminiu

In Stoc

Xray T3

Bucse pentru rulmentii fuzetelor de aluminiu

Piese de schimb pentru automodelele marca Xray. Pentru a verifica daca piesa coincide cu cea de pe modelul dumneavostra va rugam sa verificati in manualul modelului sau verificati pe siteul producatorului.

Intinzator curea T2/T3

Xray T3

Intinzator curea T2/T3

Intinzartor curea Xray T2/T3

Xray 38T Differential Pulley w/Labyrinth Dust Cover - 1 - 702

In Stoc

Xray T2

Xray 38T Differential Pulley w/Labyrinth Dust Cover

This is a XRAY 38T Differential Pulley with Labyrinth Dust Cover, and is intended for use with the XRAY 305003 and 305004 aluminum ball differentials.

Xray CH-Chlip 8 (10 buc)

In Stoc

Xray T2

Xray CH-Clip 8 (10 buc)

CH-clip - 8 mm diametru. Set de 10 bucati.

Xray Rear Suspension Arm (Rubber-Spec - Hard)

Xray T2

Xray Rear Suspension Arm (Rubber-Spec - Hard)

This is a replacement hard composite rear lower suspension arm for the XRAY T2 1/10th scale touring car. Recommended for use in standard conditions or with rubber tires. Marked with “H” for easy identification. May be used on either left or right side.

Xray T2/T3 Composite Upper Holder for Bumper

In Stoc

Xray T2

Xray T2/T3 Composite Upper Holder for Bumper

T2/T3 Suport superior pentru bumper. Realizat din material compozit de foarte buna calitate.

Xray T2/T3 Ball Joint 5mm Unidirectional - Open (4 buc)

In Stoc

Xray T2

Xray T2/T3 Ball Joint 5mm Unidirectional - Open (4 buc)

Capete de bara din material compozit pentru "ball joints" de 5 mm, cu deschidere pe o singura latura. Set de 4 bucati.

T1/T2 Drive Shaft Replacement Plastic Cap 3mm (4 buc) - V2

In Stoc

Xray T2

T1/T2 Drive Shaft Replacement Plastic Cap 3mm (4 buc) - V2

Low friction drive pin clips for protection and cushioning of drive shaft pin in diff outdrives. Set of four. Xray 2005 2006 2007

T2 Composite Bumper

In Stoc

Xray T2

T2 Composite Bumper

T2/T3 Composite Bumper.

Xray Composite Medium Rubber-Spec C-Hub (Left 4 deg) - 1 - 688

In Stoc

Xray T2

Xray Composite Medium Rubber-Spec C-Hub (Left 4 deg)

This is a optional XRAY Molded Composite Medium Rubber-Spec 4° Left Side C-Hub, and is intended for use with the XRAY T2/t3 family of vehicles.

T2/T3 Ball Joint 4.9mm - Open V2 (8)

Xray T2

T2/T3 Ball Joint 4.9mm - Open V2 (8)

Capete de bara din material compozit, deschise pe ambele laterale, cu diametrul de 4.9 mm. Set de 8 bucati.

Xray Composite Medium Rubber-Spec C-Hub (Right 4 deg)

Xray T2

Xray Composite Medium Rubber-Spec C-Hub (Right 4 deg)

This is a optional XRAY Molded Composite Medium Rubber-Spec 4° Right Side C-Hub, and is intended for use with the XRAY T2 family of vehicles.

T2/T3 Composite C-Hub Bushing (2+2)

Xray T2

T2/T3 Composite C-Hub Bushing (2+2)

Composite bushings for all T2/T3 alu C-hubs.

Xray Ball Joint 5.8mm

Xray T2

Xray Ball Joint 5.8mm

Molded ball joints 5.8mm (Set of four).

T2 Front Arm Pivot Pin (2 buc)

In Stoc

Xray T2

T2 Front Arm Pivot Pin (2 buc)

Front lower outer pivot pins for XRAY T2. Hardened for very high durability and long life. Set of two.

Xray Ball Joint 4.9mm - Open (4 buc)

In Stoc

Xray T2

Xray Ball Joint 5mm - Open (4 buc)

Molded composite 5mm ball joints for anti-roll bar links, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 4.

Xray 1.5x8mm ECS Drive Shaft Pin (2 buc)

In Stoc

Xray T2

Xray 1.5x8mm ECS Drive Shaft Pin (2 buc)

This is a set of two replacement XRAY 1.5x8mm ECS Drive Shaft Pins, and are intended for use with the XRAY ECS Drive Shafts for the T2 family of vehicles. These polished chrome pins are specially hand ground for maximum precision.

Set mentenanta bile diferential 2.4mm

In Stoc

Xray T3

Set mentenanta bile diferential 2.4mm

Piese de schimb pentru automodelele marca Xray. Pentru a verifica daca piesa coincide cu cea de pe modelul dumneavostra va rugam sa verificati in manualul modelului sau verificati pe siteul producatorului.

Shock Ball Joint – Open (4) 308316

In Stoc

Xray T3

Shock Ball Joint – Open (4)

Piese schimb Team Xray Shock Ball Joint – Open (4)

XRAY Spring-Set C 2.6 (2)

In Stoc

Xray T3

XRAY Spring-Set C 2.6 (2)

Piese schimb Team Xray XRAY Spring-Set C 2.6 (2)

Alu T6 Diff Long Output Shaft - Hard Coated - Black

In Stoc

Xray T3

Alu T6 Diff Long Output Shaft - Hard Coated - Black

Piese schimb Team Xray Alu T6 Diff Long Output Shaft - Hard Coated - Black

Composite Ball Joint 4.9mm - Closed (4)

In Stoc

Xray T3

Composite Ball Joint 4.9mm - Closed (4)

Piese schimb Team Xray Composite Ball Joint 4.9mm - Closed (4)

High-Performance Kevlar Drive Belt Front 3x501mm

In Stoc

Xray

High-Performance Kevlar Drive Belt Front 3x501mm

Piese schimb Team Xray High-Performance Kevlar Drive Belt Front 3x501mm

Composite Dual Servo Saver Arm (L+R)

In Stoc

Xray T3

Composite Dual Servo Saver Arm (L+R)

Piese schimb Team Xray Composite Dual Servo Saver Arm (L+R)

XRAY Spring-Set C 3.0 (2)

In Stoc

Xray T3

XRAY Spring-Set C 3.0 (2)

Piese schimb Team Xray XRAY Spring-Set C 3.0 (2)

Cone Washer ST 3x8x0.5 (10)

In Stoc

Xray T3

Cone Washer ST 3x8x0.5 (10)

Piese schimb Team Xray Cone Washer ST 3x8x0.5 (10)

Se afiseaza 1-36 din 104 produs(e)

1
2
3

Xray

Produs adaugat din wishlist

Product added to compare.